Showing all 15 results
Protects your concrete against salt damage and water absorption, thus significantly reducing freeze and thaw damage along with reducing stain penetration. Environmentally friendly.
One gallon of concentrate covers 2,000 square feet.
3 Simple Steps: Wash stamped concrete. Let Dry. Apply 2 coats of sealer. Environmentally-friendly, low VOC’s, and easy to use. Will last 2-3 years.
One gallon covers first and second coats of 600-750 square feet.
Recommended surfaces include architectural precast or cast in place, split face concrete blocks, brick, mortars, natural stones, limestone, granite, sandstone, terra cotta, ceramic tile and grout, adobe, exposed aggregate products, Portland cement stuccos, plaster and concrete masonry units. Forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating.
One quart mixed covers 500 square feet.
This sealer treats and protects a range of concrete surfaces without discoloring or creating a slippery surface. Protects against water, oil, urine, other pet accidents, and citrus absorption, jet fuel, and oil, organic stains.
One gallon per 200 square feet.
Poly-Shine Concrete Sealer is a water-based, clear sealant that gives surfaces a glossy “wet” finish. It enhances the color and appearance of brick, concrete, stone and other similar surfaces. Design for heavy duty foot traffic.
Key Features:
This sealer is a water-based penetrating, chemically-reactive, siliconate, concrete sealer developed to provide long-lasting protection and used as a surface treatment to form a water repellent surface and reduce water, oil, citrus absorption, jet fuel, oil, organic stains into the substrate. Seals smooth concrete such as garage floors, warehouses, workshops, and print shops, plane hangers, docks, and machine shops.
One pint mixed covers 500 square feet.
Finely ground dry silicate material for addition when sealing concrete for slip resistance. Great for areas such as walkways, driveways, garage floors, and patios. Applied after sealing compound is in place but before it dries. The more you add the rougher the surface will be.
SealGreen SG20 Tintable Sealer is an additive for Smith’s Color Floor water-based stains, which promotes adhesion, increases durability of the stains and seals the concrete floor with salt defense technology.
The final look is variegated color with NO gloss – matte finish. SG20 Tintable Sealer is a sealer that chemically reacts with the concrete and has salt defense technology. For use only on outside and broom finish concrete. The Tinted SG20 Sealer can be applied with a garden sprayer (bug sprayer), airless sprayer, or using faux methods like sponges, rags.
SealGreen Enhancing Paver Sealer enhances the natural color of porous stone, pavers and other masonry while also providing excellent water repellent and resistance to staining without creating a gloss surface. SealGreen Enhancing Paver Sealer is a UV stable, penetrating treatment that provides long lasting protection and easy maintenance.
Protects surfaces and grout lines from stains and discoloration caused by liquids, cleaning products and other contaminates. Has built-in UV protection that shields surfaces from fading, as well as mildewcides to prevent the growth of mold and mildew. Offers a relatively smooth texture, and provides slip resistance with the use of very small aggregate particles and nanotechnology materials (similar in texture to 400-grit sandpaper).
One gallon covers 350-400 square feet.
An acrylic wax emulsion designed to give high gloss look to finished surfaces. Acceptable for use in schools, health care, commercial and industrial buildings. Quick dry time is ideal for retail stores where quick access for walking traffic is required
One gallon covers 1,500-1,900 square feet of stained concrete.
This epoxy penetrates the concrete surface forming a semi-resilient barrier, quickly curing, and allowing foot traffic in less than an hour.
Designed for high traffic applications to resist spills, protect colors and surfaces from yellowing under the UV of sunlight.
One gallon covers 400 square feet of plain concrete or 600-750 square feet pf stained concrete. Full details below
Siliconate sealers use a chemistry with larger molecules that reacts with the chemicals in the concrete forming a gel that hardens and chemically bonds to interior of the concrete. Create a water repellent surface which reduces absorption of water, oil, citrus, salt, jet fuel, organic stains, etc. into the concrete.Provides long-lasting protection without altering the natural appearance of the concrete surface or creating a surface film.
One pint mixed covers 500 square feet.
For concrete that has been previously sealed, to seal any pores due to wear and traffic. Easy minimum maintenance along with exceptional topical closure and deep permanent sealing properties.
1 quart mixed into 4-3/4 gallons of clean water will make 1,000 square feet of maintenance sealer for a 3-5 year treatment.
Our water based Cure and Seal Sealer penetrates into and becomes part of the concrete, resisting damage from sun and exposure.Designed for freshly installed concrete while it is “green” or still wet. Not susceptible to temperature, weather, or UV exposure.
One gallon covers 400 square feet.
FREE SHIPPING ON EVERYTHING BUT LOCAL PICKUP ITEMS. NATIONWIDE SHIPPING MAYBE DELAYED. Dismiss
