The SealGreen W10 Finish Coat is an acrylic wax emulsion, design to give high gloss look to finished surfaces with SealGreen E10 High Performance Epoxy Sealer. Also used for restoring shine or gloss to inside concrete overlays, stain floors, and other decorative concrete floors.
The SealGreen W10 Finish Coat is applies after the SealGreen E10 High Performance Sealer has cured for 24 hours.
Multiple applications of SealGreen W10 will increase the gloss level of the surface.
SealGreen W10 is also use as a maintenance coat to restore the gloss of the surface as needed.
SealGreen W-10 is an environmentally friendly, low odor finish coat.
SealGreen W-10 is acceptable for use in schools, health care, commercial and industrial buildings. SealGreen W-10’s quick dry time is ideal for retail stores where quick access for walking traffic is required.
Approximate Square Feet Coverage for floor coated with SealGreen E10 High Performance Epoxy Sealer:
| Quantity | Stained Concrete |
| 1 Gallon (1st Coat) | 1,500 – 1,900 Sqft. |
| 1 Gallon (2nd Coat) | 2,000 Plus Sqft. |
| 1 Quart (1st Coat) | 350 – 500 Sqft. |
| 1 Quart (2nd Coat) | 500 Plus Sqft. |
Physical Properties of the SealGreen W10 Finish Coat:
Solids: 25%
Flash Point: None
Dry Time: 1.5 hours
Spread Rate: 1,400 to 1,900 square feet per gallon.
Finish: High Gloss
Applicator:
Option 1: Spray apply product using a clean hand held unit.
Option 2: Apply with a microfiber mop or pad.
Option 3: Apply with ½-inch nap roller.
Optional when dry, buff with a microfiber-buffing pad.
