Removes rust stains from concrete in minutes.
Simply mix, apply a thick coat over rust stains, let sit for 2 to 20 minutes, rinse, and you’re done. No scrubbing needed!
Acid free for your safety.
Specifically designed for concrete, stone, and masonry.
1 Quart will make 1 Gallon of rust remover. Each gallon covers 60 sqft.
Showing 1–20 of 33 results
Removes rust stains from concrete in minutes.
The Original and Most Powerful Waterless Concrete Oil Cleaner Made! The Best Concrete Cleaner Around!
Gray-Out is a dry powder, completely waterless, that you apply to remove oil, grease, and other stains from your driveway, concrete patio, garage, work environment, etc. Simply spread over a concrete oil stain and scrub with a dry broom head applicator and watch the oil stains disappear; no washing needed!
Watch video demonstration below!
- Removes oil stains on driveways, garage floor, patio, concrete.
- Environment friendly enzymes that “eat” the oil rendering and remove the stains.
- Easy to use, amazingly fast. A true, no-hassle concrete cleaner solution.
- Old oil stains? No problem.
- Try it one time and you’ll never use anything else.
- 1 Pint and 1 Quart orders include a small 2″ application brush.
- Residential and commercial quantities available.
From: $13.25For concrete floors, driveways, patios, sidewalks, stamped concrete , decorative concrete, pool decks, basements, statuary, walls, concrete blocks.Can be applied with many different application tools including airless sprayers, hand pump sprayers, sponged or ragged.
All stains are made with the highest quality raw materials, superior manufacturing, and are used world-wide for functional and decorative art.
One quart covers 250 square feet. Full details below.Could take up to 2 weeks for shipping
From: $21.45The SealGreen Concrete Oil Degreaser & Cleaner Concentrate is a waterborne, environmentally-friendly cleaner that will lift and remove oil, grease and dirt from ANY washable surface. Our product is also highly effective for surface paint prep, sealing, and re-coating. Not only does the USDA authorize our product but above all professional washers recommend it since its easy to use and doesn’t require special tools.
Simple to apply, fast to work, and environmentally safe.
Acts as a detergent to clean the concrete surface removes mold and other organic stains.
Toughens the surface of the concrete by interacting with weak spots created by un-reacted calcium hydroxide.
1 lb container covers 500 square feet. Full details below
Protects your concrete against salt damage and water absorption, thus significantly reducing freeze and thaw damage along with reducing stain penetration.
A top of the line concrete sealer that offers strength and a long life span.
One gallon of concentrate covers 2,000 square feet.
This sealer treats and protects a range of concrete surfaces without discoloring or creating a slippery surface.
Protects against water, oil, urine, other pet accidents, and citrus absorption, jet fuel, and oil, organic stains.
One gallon per 200 square feet. Full details below.
Natural BEESWAX seals concrete, granite and other porous materials used for countertops from water, food stains and bacteria.
Also for metal tops such as zinc and copper. Best sealer for wood tops and chopping blocks. Foodgrade beeswax sealer is safe and non-toxic, contains no chemicals, waterproofs and seals any food surface.
From: $15.95Provides a patented synergistic inhibitor formula with ingredients that work together to prevent the spalling of concrete and corrosion of metals
Can be handled without gloves or protective clothing and is safe for vegetation.
Nontoxic and safer around children.
Effective to -20 F/-29 C.
Poly-Shine Concrete Sealer is a water-based, clear sealant that gives surfaces a glossy “wet” finish. It enhances the color and appearance of brick, concrete, stone and other similar surfaces. Design for heavy duty foot traffic.
- Stain Resistance
- Low Odor
- One Part Component
- Glossy Look
- Low VOC Content
This product is currently on back order from the manufacturer.
SealGreen Efflorescence Remover is for removing efflorescence, salts, minerals and hard water deposits from pavers, split block, clay brick, cinder blocks and natural stones.
- Effectively Removes Efflorescence
- Heavy Duty Surface Cleaner
- Prepares Unsealed Surfaces for Sealing
- Concentrated Formula
Questions? Give Us A Call (636) 942-7151.
A waterborne, environmentally-friendly cleaner that will lift and remove oil, grease and dirt residue from ANY washable surface.
Has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.
One gallon of ready to use cleaner covers approximately 100 to 250 square feet. Full details below.
Recommended surfaces include architectural precast or cast in place, split face concrete blocks, brick, mortars, natural stones, limestone, granite, sandstone, terra cotta, ceramic tile and grout, adobe, exposed aggregate products, Portland cement stuccos, plaster and concrete masonry units.
Forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating.
One quart mixed covers 500 square feet. Full details below.
From: $51.95This sealer is a water-based penetrating, chemically-reactive, siliconate, concrete sealer developed to provide long-lasting protection and used as a surface treatment to form a water repellent surface and reduce water, oil, citrus absorption, jet fuel, oil, organic stains into the substrate.Seals smooth concrete such as garage floors, warehouses, workshops, and print shops, plane hangers, docks, and machine shops.One pint mixed covers 500 square feet. Full details below.
From: $13.25Water-based, environmentally friendly color stains for concrete.
Can be applied with many different application tools including airless sprayers, hand pump sprayers, sponged or ragged.
All stains are made with the highest quality raw materials, superior manufacturing, and are used world-wide for functional and decorative art.One quart covers 250 square feet. Full details below.Could take up to 2 weeks for shipping
Finely ground dry silicate material for addition when sealing concrete for slip resistance.
Great for areas such as walkways, driveways, garage floors, and patios.
Applied after sealing compound is in place but before it dries.
The more you add the rougher the surface will be.
SealGreen SG20 Tintable Sealer is an additive for Smith’s Color Floor water-based stains, which promotes adhesion, increases durability of the stains and seals the concrete floor with salt defense technology.
The final look is variegated color with NO gloss – matte finish. SG20 Tintable Sealer is a sealer that chemically reacts with the concrete and has salt defense technology. For use only on outside and broom finish concrete. The Tinted SG20 Sealer can be applied with a garden sprayer (bug sprayer), airless sprayer, or using faux methods like sponges, rags.
SealGreen Paver Cleaner, is a dual purpose product designed for the preparation of concrete or clay paver surfaces to clean dirt, mold and mildew, and prepare the surface for a sealer application. Secondly, the cleaner toughens the surface of the concrete by interacting with weak spots created by un-reacted calcium hydroxide.
- Aggressive Cleaner
- Strengthens surface
- Low Odor
SealGreen Enhancing Paver Sealer enhances the natural color of porous stone, pavers and other masonry while also providing excellent water repellent and resistance to staining without creating a gloss surface. SealGreen Enhancing Paver Sealer is a UV stable, penetrating treatment that provides long lasting protection and easy maintenance.